GO! Strip Cutter-1-3/4" Die (1-1/4" Finished) 5 Strips
Item #: AQ55083
This die quickly and perfectly cuts 1 3/4" strips for narrow borders, sashing and more.
The GO! Strip Cutter features blades open an both ends so you can cut still-folded fabric as it comes off the bolt.
To cut squares or rectangles, lay cut strips across die perpendicular to blades. To cut diamonds, lay strips at a 45 or 60 degree angle.
AQ Cutting Mat Required: GO! Cutting Mat, 10 in. x 24 in. (25.4 cm x 61 cm) [Sold separately: AQ55113]
Dimensions:
• Cut Size: 1 3/4"W (4.4 cm)
• Finished Size: 1 1/4"W (3.2 cm)
• Die Board Size: 10 in. x 24 in. (25.4 cm x 61 cm)
How to Die Cut 1 3/4" Strips:
• 1-3/4" Strips: Cut 9 1/4" wide strips across the width of fabric to cut five, 13/4" strips. Position fabric on die so fold of fabric is perpendicular to cutting blades and will roll through the cutter first. One yard of 40" wide fabric cuts 19 strips.
• 1-3/4" Squares: Start with a 1 3/4" strip aligning it across the die board with the 90° guide line. Fanfold into 9 1/4" widths. Cut 21, 1 3/4" squares across the width of fabric. One yard of 40" wide fabric cuts 399 squares.
• 45° Diamond-2 1/2" Cut Side Edge: Start with a 1-3/4" strip. Align your 1-3/4" strip across the die board to the right side of the 45° guide line.
• 30° Diamond-3 1/2" Cut Side Edge: Start with a 1-3/4" strip. Align your 1-3/4" strip across the die board to the right side of the 30° guide line.
• 60° Diamond-2 1/8" Cut Side Edge: Start with a 1-3/4" strip. Align your 1-3/4" strip across the die board to the right side of the 60° guide line.
Why Quilters Love the GO! 1 3/4" Strip Cutter Die:
• The smaller the strip, the more difficult it is to cut accurately and the more strips you need. The GO! Strip Cutter-1 3/4" makes it easy to cut perfect sashing, narrow borders, bargello quilts, log cabin quilts and more.
• No sliding rulers! No miscuts! The GO! Strip Cutter-1-3/4" includes five strips that can be a challenge to cut by hand.
• Idea for scrappy quilts! Easily cut up to 6 layers of scraps or full length fabric on the die to get 15 perfectly cut 1-3/4" strips in one pass thru the cutter.
• GO! Strip Cutter-1-3/4" includes 1/4" seam allowances for easy alignment and piecing.
• Cut perfect 1-3/4" strips, then use the angled guide lines to cut squares and diamonds.
• Die blades are 23" long and are open at both ends to allow cutting of fabric that is still folded as it comes off the bolt.
• Cut strips out of a variety of fabrics: cotton, batiks, flannel, fleece, Cuddle® fabrics and more!
AccuQuilt Benefits:
• Cut so much more fabric in less time.
• Get accurate cuts every time—No slipping rulers or mistakes
• Easiest to use—Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam—Get more out of your fabric by placing it only over the shape you want to cut.
• Safe to use—No blades come anywhere near your fingers
